Sony WIC300 Bluetooth Connection to Windows 10

Having purchased a Sony blue tooth headset I found that I was unable to connect my Windows 10 laptop to the headset.  After doing much searching I found this link on the Sony website about resetting it back to factory settings.  Initializing the headset to restore factory settings. This enabled Windows 10 to then connect to the headset.  I then made sure that I had connections to my other devices: phone, tablet, etc. after creating the connection to Windows 10.

Instructions from website:

Disconnect the micro-USB cable, turn off the headset, then press and hold the  button and the - button simultaneously for more than 7 seconds.

The indicator (blue) flashes 4 times (   ), and the settings such as the volume adjustment are reset to the factory settings. This operation resets volume settings, etc., and deletes all pairing information. In this case, delete the pairing information of the headset from the Bluetooth device, and then pair them again.

If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.